Mercedes Radio Removal
Mercedes radio removal is required to locate the serial number for obtaining your mercedes radio code or also for mercedes radio replacement and repair. This is essential for the mercedes radio code generator to calculate the code.As you generate the original stereo code for your Mercedes radio based on the serial number, unlike other methods that use the vehicles registration number, this means using car radio serial number is more accurate, especially if its a second hand Mercedes unit or has been replaced by a previous owner or a dealer under warranty.
| This mercedes radio removal tool is required to remove Audi and becker Mercedes car stereos. |  |
Removing mercedes radio is simple, just put the two slots in the corners of the mercedes car stereo unit as shown in the image.
Insert the mercedes radio removal tool just far enough to feel and hear a click. The removal tools will lock into place allowing you to pull out the Mercedes radio without too much pressure
Insert both index fingers into the rings of the removal tools and carefully pull toward you to remove the car stereo from its cavity.
To remove the radio removal tool, press the small metal tabs on both the left and right sides of the radio with your finger while pulling the tool out. When the removal tools are out of the radio put it back into place.
You should note that some Mercedes Benz Radios require two sets of stereo removal tools. You can tell by seeing how many slots there are on the four corners of the radio.
Mercedes Serial Number Location Guide
Once you have successfully removed your autoradio, Locate the serial number by inspecting the top and right hand side of the stereo, this is required for mercedes radio decoding.
Becker split serial number
- Model : BE1122 - Serial : Y7654321
- Model : BE0837 - Serial : Y1245784
- Serial : BE1234Y1234567
- Serial : BE411021234567
