Alpine Car Stereo Code Entry Instructions

• Alpine P05269484AB (CHRYSLER) Code entry instructions

 
Code entry is only possible when the main display shows "CODE"
If the display does not appear to change when the code is entered, then the unit is Code locked,
and will require Decoding to reset.
The Code is entered by pressing the corresponding presets in order.
But take care as you may only have one attempt !
eg:- if your code number is 4332
Press Preset "4" once only
Press Preset "3" once only
Press Preset "3" once only
Press Preset "2" once only
The Radio will now display "ON" and should now function.

• Alpine CD -READy CM5908 (BMW) Code entry instructions

After switching on of feed, on the display will fluoresce “CODE”.
Introduce directly the correct the 5th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “65213” that pressed should be the buttons “6-5-2-1-3”.
After the introduction of last figure the radio tape recorder will be included.
With the code input on the display its value [neotobrazhaetsya], only “CODE”.
To [budte] they are attentive with the collection of the code.

• Alpine 7286L Code entry instructions

After switching on, on the display blinks the inscription CODE.
Further should be harvested button 1, on the display will fluoresce 000 0.
Introduce 4 numbers of the code, using a button DX for the first number, and button 1-2-3, for the following three numbers.
For affirming the collected code, press button BAND.

• Alpine CDM of 7983R 3CD Code entry instructions

You will include radio tape recorder by button “PWR”, on the display will fluoresce “CODE”.
To further harvest button “FUNC”, on the display will fluoresce 0000.
Press button “^&” repeatedly, to the necessary number and press button “UP "” in order to pass to another discharge.
To repeat this operation for all remaining numbers of the code.
If on the display the code accurate, we press button “TUNER/BAND” for the confirmation.
Radio tape recorder will be included.

• Alpine 7982R Code entry instructions

So that on the display would fluoresce CODE, should be harvested button PWR.
To further harvest button FUNC, on the display will fluoresce 0000.
Press button ^ repeatedly, to the necessary number and press button UP in order to pass to another discharge.
To repeat this operation for all remaining numbers of the code.
If on the display the code accurate, we press button TUNER/BAND for the confirmation.
[Maknitola] will be included in operating conditions.
There are no remaining data.

• Alpine P04704345- G (Chrysler) Code entry instructions

After switching on of feed, on the display will fluoresce “CODE”.
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
After the introduction of last figure the radio tape recorder will be included.

• Alpine Of p04858543 (Chrysler) Code entry instructions

After supply lead to the radio tape recorder on the display will fluoresce “CODE”.
By buttons 1 5 introduce the correct code.
If is introduced the accurate code, on the display will fluoresce “ON” and radio tape recorder will be included.

• Alpine P04858583AE (Chrysler) Code entry instructions

After supply lead to the radio tape recorder on the display will fluoresce “CODE”.
By the buttons of the selection of stations introduce the correct code.
In the radio tape recorder is used direct code input, i.e., if the code “1254”, then we consecutively press buttons “1”, “2”, “5” and “4”.
If is introduced the accurate code, on the display will fluoresce “ON” and radio tape recorder will be included.
Attention! Incorrect pushing even of one knob with the code input leads to the erroneous introduction (cannot be abolished pushing of knob). After incorrect code input on the display will appear the inscription “OF REPEAT”. In you only of 3 attempts at the code input. After the third incorrect attempt at the code input at the display of radio tape recorder appears the inscription “WAIT” and radio tape recorder passes into the mode of standby (~ 2 hours):.

• Alpine P04858584AF (Chrysler) JAPAN Code entry instructions

After supply lead to the radio tape recorder on the display will fluoresce “CODE”.
By the buttons of the selection of stations introduce the correct code.
In the radio tape recorder is used direct code input, i.e., if the code “1254”, then we consecutively press buttons “1”, “2”, “5” and “4”.
If is introduced the accurate code, on the display will fluoresce “ON” and radio tape recorder will be included.
Attention! Incorrect pushing even of one knob with the code input leads to the erroneous introduction (cannot be abolished pushing of knob). After incorrect code input on the display will appear the inscription “OF REPEAT”. In you only of 3 attempts at the code input. After the third incorrect attempt at the code input at the display of radio tape recorder appears the inscription “WAIT” and radio tape recorder passes into the mode of standby (~ 2 hours).

• Alpine P04858513AG- A Chrysler Code entry instructions

After switching on of feed, on the display will fluoresce “CODE”.
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
If is introduced the accurate code, on the display will fluoresce “ON” and radio tape recorder will be included.

• Alpine SC 802 (Volvo) Code entry instructions

After switching on of feed, on the display will fluoresce “CODE”.
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
After the introduction of last figure the radio tape recorder will be included.

• Alpine SC 800 (Volvo), Alpine SC 801 (Volvo), Alpine SC 805 (Volvo) Code entry instructions

After switching on of feed, on the display will fluoresce “CODE”.
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
After the introduction of last figure the radio tape recorder will be included.

• Alpine SC 901 (Volvo) Code entry instructions

After switching on of feed, on the display will fluoresce “CODE”.
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
After the introduction of last figure the radio tape recorder will be included.

• ALPINE CM939CO ASURA BOSE Code entry instructions

After switching on of feed, on the display must will fluoresce “CODE”.
By buttons “1-2-3-4-5-6” to collect the correct code.
Let us assume the code of radio tape recorder = 31426 that
Press “3” one time
Press “1” one time
Press “4” one time
Press “2” one time
Press “6” one time
If the code is introduced correctly, it corresponds to the code in the accompanying card,
the radio tape recorder itself will be included after the pressure of last figure.

• Alpine AUA-3020 NEW (KIA) Code entry instructions

After switching on of feed approximately one minute blinks the light-emitting diode “Theftprotect” and then on the display will fluoresce “CODE”.
Introduce the correct the 4th marking code with the aid of the buttons “1,2, 3, 4”.
When on the display fluoresces the accurate code one should give to the knob of loudness.
Radio tape recorder will be included.
After three incorrect attempts on the display “OF HOLD”.
Hour stands from [etots] by inscription, then again “CODE”.