- Alpine P05269484AB (CHRYSLER) Code entry instructions
Code entry is only possible when the main display shows "CODE"
If the display does not appear to change when the code is entered, then the unit is Code locked,
and will require Decoding to reset.
The Code is entered by pressing the corresponding presets in order.
But take care as you may only have one attempt !
eg:- if your code number is 4332
Press Preset "4" once only
Press Preset "3" once only
Press Preset "3" once only
Press Preset "2" once only
The Radio will now display "ON" and should now function.
- Alpine CD -READy CM5908 (BMW) Code entry instructions
Introduce directly the correct the 5th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “65213” that pressed should be the buttons “6-5-2-1-3”.
After the introduction of last figure the radio tape recorder will be included.
With the code input on the display its value [neotobrazhaetsya], only “CODE”.
To [budte] they are attentive with the collection of the code.
- Alpine 7286L Code entry instructions
Further should be harvested button 1, on the display will fluoresce 000 0.
Introduce 4 numbers of the code, using a button DX for the first number, and button 1-2-3, for the following three numbers.
For affirming the collected code, press button BAND.
- Alpine CDM of 7983R 3CD Code entry instructions
To further harvest button “FUNC”, on the display will fluoresce 0000.
Press button “^&” repeatedly, to the necessary number and press button “UP "” in order to pass to another discharge.
To repeat this operation for all remaining numbers of the code.
If on the display the code accurate, we press button “TUNER/BAND” for the confirmation.
Radio tape recorder will be included.
- Alpine 7982R Code entry instructions
To further harvest button FUNC, on the display will fluoresce 0000.
Press button ^ repeatedly, to the necessary number and press button UP in order to pass to another discharge.
To repeat this operation for all remaining numbers of the code.
If on the display the code accurate, we press button TUNER/BAND for the confirmation.
[Maknitola] will be included in operating conditions.
There are no remaining data.
- Alpine P04704345- G (Chrysler) Code entry instructions
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
After the introduction of last figure the radio tape recorder will be included.
- Alpine Of p04858543 (Chrysler) Code entry instructions
By buttons 1 5 introduce the correct code.
If is introduced the accurate code, on the display will fluoresce “ON” and radio tape recorder will be included.
- Alpine P04858583AE (Chrysler) Code entry instructions
By the buttons of the selection of stations introduce the correct code.
In the radio tape recorder is used direct code input, i.e., if the code “1254”, then we consecutively press buttons “1”, “2”, “5” and “4”.
If is introduced the accurate code, on the display will fluoresce “ON” and radio tape recorder will be included.
Attention! Incorrect pushing even of one knob with the code input leads to the erroneous introduction (cannot be abolished pushing of knob). After incorrect code input on the display will appear the inscription “OF REPEAT”. In you only of 3 attempts at the code input. After the third incorrect attempt at the code input at the display of radio tape recorder appears the inscription “WAIT” and radio tape recorder passes into the mode of standby (~ 2 hours):.
- Alpine P04858584AF (Chrysler) JAPAN Code entry instructions
By the buttons of the selection of stations introduce the correct code.
In the radio tape recorder is used direct code input, i.e., if the code “1254”, then we consecutively press buttons “1”, “2”, “5” and “4”.
If is introduced the accurate code, on the display will fluoresce “ON” and radio tape recorder will be included.
Attention! Incorrect pushing even of one knob with the code input leads to the erroneous introduction (cannot be abolished pushing of knob). After incorrect code input on the display will appear the inscription “OF REPEAT”. In you only of 3 attempts at the code input. After the third incorrect attempt at the code input at the display of radio tape recorder appears the inscription “WAIT” and radio tape recorder passes into the mode of standby (~ 2 hours).
- Alpine P04858513AG- A Chrysler Code entry instructions
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
If is introduced the accurate code, on the display will fluoresce “ON” and radio tape recorder will be included.
- Alpine SC 802 (Volvo) Code entry instructions
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
After the introduction of last figure the radio tape recorder will be included.
- Alpine SC 800 (Volvo), Alpine SC 801 (Volvo), Alpine SC 805 (Volvo) Code entry instructions
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
After the introduction of last figure the radio tape recorder will be included.
- Alpine SC 901 (Volvo) Code entry instructions
Introduce the correct the 4th marking code with the aid of the buttons “1 6”.
If the code of radio tape recorder “6521” that pressed should be the buttons “of 6-5-2-1”.
After the introduction of last figure the radio tape recorder will be included.
- ALPINE CM939CO ASURA BOSE Code entry instructions
By buttons “1-2-3-4-5-6” to collect the correct code.
Let us assume the code of radio tape recorder = 31426 that
Press “3” one time
Press “1” one time
Press “4” one time
Press “2” one time
Press “6” one time
If the code is introduced correctly, it corresponds to the code in the accompanying card,
the radio tape recorder itself will be included after the pressure of last figure.
- Alpine AUA-3020 NEW (KIA) Code entry instructions
Introduce the correct the 4th marking code with the aid of the buttons “1,2, 3, 4”.
When on the display fluoresces the accurate code one should give to the knob of loudness.
Radio tape recorder will be included.
After three incorrect attempts on the display “OF HOLD”.
Hour stands from [etots] by inscription, then again “CODE”.
